Introduction; Safety Measures - Mettler SevenGo Mode D'emploi

1.

Introduction

Thank you for purchasing this high quality METTLER TOLEDO portable meter. Electrochemistry in motion
– that is our motto. And with the SevenGo™ portable line we really mean it.
SevenGo™ is much more than just a series of portable meters with an excellent price/performance ratio. It
is an ingenious concept that includes many exciting new features:
- IP67 rating: this applies to the instrument itself as well as to the sensors and the connections;
- optimum ease of use, making the operating instructions primarily a source of reference;
- excellent ergonomics, as if the instrument were part of you;
- option for regular equipment qualification, giving you full confidence that your measurement results are
always accurate;
- useful accessories such as the electrode clip, the protecting cover, the new washable carry case, as
well as the optional field assistant, ErGo™ – the ultimate aid for all measurements in the plant as well
as in the field.
2.

Safety measures

Measures for your protection
- Never work in an environment subject to explosion hazards! The housing of the instrument is
not gas tight (explosion hazard due to spark formation, corrosion caused by the ingress of
gases).
- When using chemicals and solvents, comply with the instructions of the producer and the
general lab safety rules!
Measures for your operational safety
- Do not unscrew the two halves of the housing.
- Have the instrument serviced only by METTLER TOLEDO Service!
- Dry off any liquids sprayed immediately! The instrument is not watertight.
- Exclude the following environmental influences:
- powerful vibrations,
- direct sunlight,
- atmospheric humidity greater than 80%,
- corrosive gas atmosphere,
- temperatures below 5 °C and above 40 °C,
- powerful electric or magnetic fields!
METTLER TOLEDO SevenGo™ conductivity
Introduction / Safety precautions
3