Menu Settings; Set Reference Temperature; Set Temperature Correction Coefficient; Set Tds Factor - Mettler SevenGo Mode D'emploi

4.4

Menu settings

Press , the menu's content appears on the screen and first item blinks:

Set reference temperature

Set temperature correction coefficient

Set TDS factor

Use or to select a menu item. When the desired item blinks, press the Read key to start the setting or
press the Exit key to return to measurement.
4.4.1 Set reference temperature
When "Ref.Temp. 25 °C" appears and the frame of current reference temperature blinks, use
toggle between 25 °C and 20 °C. Press Read to confirm your selection or press Exit to return to the menu
settings.
4.4.2 Set temperature correction coefficient
When the current temperature coefficient appears, use
Read to confirm your setting or press Exit to back to menu settings.
4.4.3 Set TDS factor
When the current TDS factor appears, use
your setting or press Exit to back to menu settings.
METTLER TOLEDO SevenGo™ conductivity
or to increase or decrease the value. Press
or to increase or decrease the value. Press Read to confirm
Menu settings
or to
11