Mettler SevenGo Mode D'emploi page 13

Press and release
- Meter on/off
- Start or endpoint measurement
- Return to measurement mode
- Confirm setting; store entered value
- Start calibration
- Switch between conductivity, TDS,
salinity and resistivity measurement
mode
- Back to measurement
(ignore the input)
- Enter Menu
- Store current reading to memory
- Increase value during setting
- Scroll up through the memory
- Recall stored data
- Decrease value during setting
- Scroll down through the memory
- Start meter self-diagnosis
METTLER TOLEDO SevenGo™ conductivity
Press and hold for 2 seconds
- Switch on/off auto-off override (switch-
es off the meter after 15 minutes)
- Switch auto endpoint on/off
/
- Select calibration standard
- Review the latest calibration data
Operation
9