1. Before cleaning, please switch off the power.
2. Then take out the inner pan and lid, and firstly use the household detergent for cleaning,
and then clean water, at last use the dry cloth to wipe out the water.
3. The following parts should be included when cleaning: seal ring, pressure-limiting valve,
anti-blockage lid, releasing pipe and float valve.
*Cleaning of Seal ring: Hands clutching the edge of seal ring to pull upward, after cleaning,
press down the seal ring towards the edge of supporting lid, take the seal ring to targeting
the middle of the lid steel ring then press down: check if the round very easily, then can use
it. Please note that it can't be put contrarily.(see picture15.16)
(Picture15)
*Cleaning of anti-blockage cover: Pull out the anti-blockage cover upward, and then press it
down after cleaning.(see picture17.18)
(Picture17)
*Cleaning of float valve: Move slightly the float valve core up and down with hand, also
remove the food particles in the small ring of the float valve and cleanthem with water.(see
picture19)
*Cleaning of exhaust valve: Lift up the exhaust valve, and clean it with water, then place it
back to the exhaust valve holder.(see picture20)
(Picture16)
(Picture18)