Bresser Digitalmicro Bowl Mode D'emploi page 29

Page: Use the direction keys (, ,
, ) to select files (each marked
with yellow borders). Press OK to
protect the selected files.
The file protection is displayed
through the lock symbol. The protec-
tion can be canceled with "Cancel"
and OK for individual files (in Protec-
tion / Single) or for all files (in Protec-
tion / All).
Deleting Files
• You access the picture index mode
by pressing the Esc key. (You press
the Esc key three times to access
the picture index mode when you
are in the digital photo mode).
• Press the menu key to open the
storage menu.
• Using the direction keys (, ),
select the option „Delete." Press
the OK key to confirm.
• Use the direction keys (, ) to
select "Single," and "All." Press OK
to confirm.
Single: Only the file with the yellow
border is deleted.
All: all saved files are deleted.
Using an SD Card
How to use the SD card
• If you have not inserted a SD card,
the files will be saved in the flash
memory.
• When inserting a SD card make
sure the contacts are facing up. Do
not push the card in forcefully. This
can damage the SD card.
• The LCD monitor displays a SD
card symbol. The storage space
available on the SD card is dis-
played on the bottom right of the
monitor.
• Before you remove the card, the
digital microscope must be shut
off.
Copying Files to the SD Card
• You access the picture index mode
by pressing the Esc key. (You press
the Esc key three times to access
the picture index mode when you
are in the digital photo mode).
• Press the menu key to open the
storage menu.
• Using the direction keys (, ),
select the option „Copy>Card." (If
you have not inserted a SD card,
this function is not selectable and
is displayed in a grey font in the
menu.) Press the OK key to con-
firm.
• Use the direction keys (, ) to
select either "Cancel" (no copying)
or "Copy" (copy the files). Press
OK to confirm.
• You will have to wait a little bit while
data is transferred to the card
("Please wait").
Connecting your Microscope to
a PC
Use the USB cable to connect the
microscope to a PC.
If the connection is done correctly,
the PC will automatically recognize
GB
29