Default: Language, Hz Setup & Restoring To Default Settings - Luda farmCam Guide D'utilisation

monitor you will need to use a computer.
1. To check for updates, please visit http://ludaelektronik.com/farmcam/
Download the latest firmware file to your computer.
2. Insert the SD card into your computer. (If you don't have a slot for SD memory cards on
your computer, use an USB memory card reader.)
3. Transfer the downloaded file to the SD memory card. Eject the card from your computer
and insert it back into the monitor.
4. Tap on the System Upgrade icon in the
System Setup screen. Tap on Start and
then OK. The monitor will install and
then turn off. Turn the monitor on again
to start using the upgraded monitor.
Default: Language, Hz Setup & Restoring to Default Settings
Here it is possible to set the Hz rate to either 50 Hz or 60Hz and to change
language. When changing the language the monitor will reset all settings
to default. To reset the monitor without changing the language, select the
language you are already using. For more detailed instructions, please see Chapter 7, Setting up
the Monitor.
41