System Setup; Power Saving; Automatic Screen Lock; Time - Luda farmCam Guide D'utilisation

15. System Setup

To get to the System Setup Screen, tap the following icons:
Menu tab -> Info -> Cogs -> System Setup
The following options and features are available under System Setup:

Power Saving

When power saving mode is turned on the screen will automatically turn off
after 2 minutes of inactivity.

Automatic Screen Lock

When enabled the screen will automatically lock the touch screen function
after 2 minutes of inactivity.

Time

This section includes two bonus features; an alarm function and a timer.
Here it is also possible to set the correct date and time of the monitor.
Select Time Setting to adjust the time. Tap on the time part you would like
to change and use the up and down buttons to adjust it. Tap Save when
you are done.

Format Storage

The Format Storage function is used to reset/wipe SD memory cards.
Press Start and then OK to format the SD memory card and erase all stored
data.
WARNING! All files on the SD card will be erased when using this function!

System Upgrade

To use this feature, you will need to use a memory card. An SD card suitable
for the monitor can be purchased from most electronic dealers.
It is possible to upgrade the firmware of the monitor. To upgrade the
40