Brightness Settings; Connecting To The Internet; Connecting The Monitor To The Internet - Luda farmCam Guide D'utilisation

Brightness Settings:

1. Tap on the following buttons to get to the Camera On Screen:
Menu tab -> Info -> Cogs -> Camera Setup -> Brightness
2. Brightness can be set between the values -2 and 2. Default value is 0. Tap the camera you
would like to adjust to select the desired value.

12. Connecting to the Internet

Connecting the Monitor to the Internet

1. Connect the monitor dock to your home Internet router/modem using the Ethernet cable.
Make sure power is connected to the dock.
2. Place the LCD monitor in the dock.
3. The monitor will ask you if you would like to connect to the Internet. Tap on the "Connect
to the internet?" field.
INFORMATION
The monitor will remember your settings. The next time you put it in the dock,
the monitor will automatically connect to the Internet.
It is possible for a maximum of two devices to connect to the monitor over the
internet at the same time.
37