Using The Extra Extension Cable; Viewing On The Monitor; Camera Views - Luda farmCam Guide D'utilisation

INFORMATION
Place the antennas with as few obstacles as possible between them.
Make sure there are no other objects such as a roof gutter or a drainpipe close
to the antenna, as they may cause interference and decrease the signal quality.
1. Remove the small antenna from the monitor and unscrew
the cable from the camera if necessary.
2. Drag the antenna cables to the places where you plan
to put the outdoor antennas. Be careful not to break the
cables, especially when mounting in cold weather. Use
the 9m cable with the 90° connection with the monitor.
3. Mount the outdoor antennas temporarily and connect
them to the cables. Connect the opposite ends of the
cables to the camera and monitor.
4. Test the reception by checking the signal quality on the
monitor.
5. When satisfied with the picture, mount the antennas
permanently.

Using the extra extension cable:

Included in the box is an extra 9m antenna cable. You can use
this cable on the camera or monitor side. If you plan to extend
the cable to the monitor you will need to use the large antenna
instead of the medium one. Waterproof the cable connection
with the included shrink tube if necessary.

10. Viewing on the Monitor

For a basic overview of the monitor icons, please see Chapter 4, The Monitor & Related Parts.

Camera Views:

The default view is QUAD view, where the 4 camera channels are displayed at the same time.
To see a camera on full screen, tap the camera picture. To return to QUAD view, tap the picture
again.
To zoom into the picture in full screen view, tap the Zoom button. You will see five different
fields in the picture. Press a field to zoom into that area.
35