Setting Up The Camera; Installing The Outdoor Antennas - Luda farmCam Guide D'utilisation

8. Setting up the camera

1. Attach the camera to the wall using the mounting foot. Make
sure there is a power source nearby and that the antenna cable
reaches the camera from the point where you intend to mount
the antenna.
2. Connect the 16m antenna cable to the back of the camera and
attach the large antenna to the cable. Do not mount the antenna
permanently yet.
3. Connect the camera to a power source using the 5V outdoor
power adaptor.

9. Installing the outdoor antennas

Place the outdoor antennas on the outer wall of the buildings, with as few obstacles between them
as possible.
34
4. Turn on the LCD monitor.
The camera picture should
show up automatically on the
display after a few seconds.
Adjust the camera angle if
necessary.