EN
After extracting the pan (3) from the appliance body (1), place it only on a
high temperatures resistant surface.
•
Gently insert the pan (3), together with the bucket (5), in the appliance body (1).
When the set time is over, the timer (3) emits a "beep".
•
Make sure that the ingredients are cooked when extracting the pan (3) from the ap-
pliance body (1).
•
Place the pan (3) on a high temperatures resistant surface.
If food is not perfectly cooked place the pan (3) back into the appliance body
(1) and set an additional cooking time.
You can manually switch off the appliance by holding down the button (8a)
for about 2 seconds.
Removing the ingredients
Steam leaks when extracting the pan (3).
Operate carefully. Burns danger! (Fig. F6)
•
To remove the ingredients (potatoes, chicken etc.), slide the release lever (6a) until a
"click" is heard. Delicately extract the pan (3) from the appliance (1), by gripping the
handle (2) and positioning it on a heat-resistant surface.
•
Press the release button (6) and extract the bucket (5) from the pan (3).
Do not spill the bucket (5) if the pan (3) is still attached,
cooking liquids collected in the pan (3) could drop on the
ingredients in the bucket (5) and/or cause burns.
•
Remove the ingredients inside the bucket (5) using wooden or plastic tools, paying
attention to not ruin the bucket (5) surface.
64
USE
FRY 5015 AIR