ohmex AIR FRYER XXL Manuel D'utilisation page 61

FRY 5015 AIR
• Do not leave the appliance unnecessarily inserted. Disconnect the plug from
the mains power supply when the appliance is not used.
• Do not obstruct ventilation or heat elimination openings.
• If the power cord of this appliance is damaged, it must be changed exclusively
by a technical assistance centre authorized by the manufacturer, since special
tools are necessary.
The electrical safety of this appliance is guaranteed only when it is
correctly connected to an effective grounding system as specified
by the current norms on electrical safety
• It's necessary to check this fundamental safety condition and, in case of doubts,
ask for an accurate check of the system by professionally qualified personnel.
The manufacturer cannot be considered liable for possible damages caused
by the lack of grounding of the system.
• Before carrying out any operation turn off the appliance and disconnect
the power plug from the outlet and wait for the appliance to cool down
completely.
• Don't connect the appliance to the power supply through external timers or
remote control systems.
☞
Keep the power cord away from the appliance hot parts.
☞
Make sure that the power cord
is not in the way when moving
around the appliance in order
to prevent that someone could,
even inadvertently, pull it top-
pling the appliance.
Burns danger!
GENERAL WARNINGS
EN
55