Connecting The Units - Pioneer DEH-P7400MP Manuel D'installation

Connecting the Units

7 When not connecting a rear speaker lead to a Subwoofer
Front output
16 cm [5/8 in]
Fuse
Subwoofer output
Multi-CD player
or Non Fading Output
(sold separately) This Product
Antenna jack
IP-Bus input(Blue)
Blue/white
To system control terminal of the power amp
IP-BUS cable
or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Orange/white
To lightnig switch terminal.
Black (ground)
To vehicle (metal) body.
With a 2 speaker system, do not connect anything to
the speaker leads that are not connected to speakers.
Use this for connections when you have the separately
available amplifier.
Connecting cords
with RCA pin plugs
(sold separately)
Power amp
(sold separately)
System remote control
+ +
Front speaker Front speaker
≠ ≠
White Gray
+ +
Front speaker Front speaker
≠ ≠
White/black Gray/black
Left Right
Green Violet
+ +
Rear speaker Rear speaker
≠ ≠
Green/black Violet/black
+ +
Subwoofer Subwoofer
≠ ≠
7 When using a Subwoofer without using a different amp (sold separately)
Power amp
(sold separately)
Multi-CD player Subwoofer output
(sold separately)
Antenna jack
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Orange/white
To lightnig switch terminal.
Black (ground)
To vehicle (metal) body.
Fig. 2
Front output
16 cm [5/8 in]
Fuse
This Product
IP-Bus input(Blue)
Blue/white
To system control terminal of the power amp
IP-BUS cable
or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
+
Front speaker
≠
Left
+
Subwoofer
≠
<ENGLISH>
White Gray
+
Front speaker
≠
White/black Gray/black
Right
Green Violet
+
Subwoofer
≠
Green/black Violet/black
Note:
Change the Initial Setting of this Product (refer to the
Operation Manual). The subwoofer output of this unit is
monaural.
Fig. 3