Electrical Connection - ETNA AP360ZT Mode D'emploi

INSTALLATION
Connection
EN 10
Electric connection
This appliance is fitted with an earthed plug, which should be
connected to an earthed wall socket.
Check that the voltage indicated on the rating plate matches the voltage
of your household supply.
The appliance should be connected to the mains as follows:
BROWN = L live
BLUE = N neutral
GREEN/YELLOW = earth
This canopy hood has been provided with a power plug. When installing
the hood, make sure that this plug remains accessible. We recommend
installing the wall socket out of view, behind the chimney cover.
Attention!
If you are making a fixed connection, you must ensure that a double
pole switch with an air gap of at least 3 mm is fitted in the supply line.
max 100 cm