FUXTEC FX-KM196 Mode D'emploi page 36

Original-Bedienungsanleitung Benzin-Kehrmaschine FX-KM196_de_en_fr_ita_rev07
Brush Direction
The brush direction is regulated by a lever (fig. 9B) that tilts it in the
required direction. Move the lever forward or rear in one of the three
available positions to tilt the brush.
· Lever forward = 15
· Lever central = 0
· Lever rear = 15
Sweeping
To sweep:
1. Turn the directional brush control
(fig. 9 B) to the required position.
(See Brush Direction)
2. Set the gear depending on the
route and the amount of material to
be swept.
3. Engage the brush drive. (fig. 9C)
4. Engage the traction drive. (fig. 9D)
NOTICE: AVOID SWEEPER DAMAGE.
Reduce travel speed to avoid hitting immovable objects.
The sweeper is equipped with an instant shut off when you release the
levers, the brush and machine stop.
Operating Tips
NOTICE: AVOID SWEEPER DAMAGE. Do not ram into piles.
Large Areas
• For uneven or dirt surfaces, reduce speed to avoid jogging the brush
and damaging it.
• Sweep creating a central passage dividing the area into two parts and
then sweeping the remaining areas. That reduces the load on the
brush.
o to the right.
o no tilt.
o to the left.
36