FUXTEC FX-KM196 Mode D'emploi page 26

Original-Bedienungsanleitung Benzin-Kehrmaschine FX-KM196_de_en_fr_ita_rev07
WARNING
KNOW YOUR EQUIPMENT
Know your equipment's capabilities, dimensions and operations
before operating. Visually inspect your equipment before you start,
and never use equipment that is not in proper working order with all
safety devices intact. Check all hardware to assure it is tight. Make sure
that all locking pins, latches, and connected devices are correctly installed
and secured. Remove and replace any damaged, tired or excessively worn
parts. Make sure all safety decals are in place and are legible. Keep decals
clean, and replace them if they become dull and hard to read.
WARNING
PROTECT AGAINST FLYING DEBRIS
Always wear proper safety glasses, goggles or a face shield when driving
pins in or out or when operation causes dust, flying debris, or any other
hazardous material.
WARNING
LOWER OR SUPPORT RAISED EQUIPMENT
Do not work under raised booms without supporting them. Do not use
support material made of concrete blocks, logs, buckets, barrels or any
other material that could suddenly collapse or shift positions. Make sure
support material is solid, not decayed, warped, twisted, or tapered. Lower
booms to ground level or onto blocks. Lower booms and attachments to the
ground before leaving the cab or operator's station.
WARNING
DO NOT MODIFY MACHINE OR ATTACHMENTS
Modifications may weaken the integrity of the attachment. They may impair
the function, safety, life and performance of the attachment, when making
repairs, use only the manufacturer's genuine parts, following
authorised instructions. Other parts may be substandard in fit and
quality. Never modify any RoPS (Rollover Protection System) equipment or
device. Any modifications must be authorised in writing by the
manufacturer.
26