FUXTEC FX-KM196 Mode D'emploi page 35

Original-Bedienungsanleitung Benzin-Kehrmaschine FX-KM196_de_en_fr_ita_rev07
WARNING
Leave the brush hood (shield) and all other shields and safety
equipment in place when operating the sweeper.
• When sweeping on rough terrain, reduce speed to avoid "bouncing" the
sweeper. Loss of control can result.
• Never sweep toward people, buildings, vehicles or other objects that
can be damaged by flying debris.
• Only operate the controls while the engine is running.
• While you operate the sweeper slowly in an open area, check for proper
operation of all controls and all protective devices. Note any repairs
needed during the operation of the sweeper. Report any needed
repairs.
Before each use
Perform daily maintenance as indicated in Maintenance Schedule.
Run the sweeper at a low idle, check for proper brush rotation and drive
engagement.
WARNING
AVOID SERIOUS INJURY.
Check for large objects that could harm the operator or others if
thrown by the sweeper. Remove these items before operating.
During use
Directing Debris
• Avoid excessive downward pressure on the brush sections to prevent
excessive wear. A two- to a four-inch-wide pattern is sufficient for most
applications.
• Direct debris by angling the brush head in that direction.
• Observe wind direction. Sweeping with the wind makes sweeping more
effective and helps keep debris off the operator.
• The terms swing, and angle is used interchangeably.
35