FUXTEC FX-KM196 Mode D'emploi page 27

Original-Bedienungsanleitung Benzin-Kehrmaschine FX-KM196_de_en_fr_ita_rev07
WARNING
SAFELY MAINTAIN AND REPAIR EQUIPMENT
• Do not wear loose clothing or any accessories that can catch in moving
parts. If you have long hair, cover or secure it so that it does not become
entangled in the equipment.
• Work on a level surface in a well-lit area.
• Use properly grounded electrical outlets and tools.
• Use the correct tool for the job at hand. Make sure they are in good
condition for the task required.
• Wear the protective clothing equipment specified by the tool
manufacturer.
WARNING
SAFELY OPERATE EQUIPMENT
Do not operate equipment until you are thoroughly trained by a qualified
operator in how to use the controls; know its capabilities, dimensions, and
all safety requirements. See your prime movers manual for these
instructions.
• keep all step plates, grab bars, pedals, and controls free of dirt, grease,
debris, and oil.
• Never allow anyone to be around the equipment when it is operating.
• Do not allow riders on the attachment or the prime mover.
• Do not operate the equipment from anywhere other than the correct
operator's position.
• Never leave equipment unattended with the engine running or with this
attachment in a raised position.
• Do not alter or remove any safety feature from the prime mover or
this attachment.
• know your worksite safety rules as well as traffic rules and flow. When in
doubt on any safety issue, contact your supervisor or safety coordinator for
an explanation.
WARNING
FALL HAZARD DO NOT OPERATE NEAR UNGUARDED EDGES.
27