Warning Symbols - TDK-Lambda DLP Série Mode D'emploi

BEFORE USING THE POWER SUPPLY UNIT
Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock,
damage to the unit or a fire hazard.

• Warning Symbols

.
DO NOT MODIFY, DISASSEMBLE THE POWER SUPPLY.
.
HOT SURFACE.
.
READ INSTRUCTION MANUAL BEFORE CONNECTING TO MAINS.
.
ELECTRIC SHOCK HAZARDOUS ON THE CONNECTOR SECTION.
NOTICE:
(1) Installing/Storage Environment
1. Store the product with ambient temperature –30 to +85 °C, and relative humidity 10 to 95% (No Dewdrop).
2. Never operate the unit under over current or shorted conditions for 30 seconds or more and out of Input
Voltage Range in specification which could result in damage or insulation failure or smoking or burning.
3. Confirm connections to input/output terminals are correct as indicated in the instruction manual.
4. Use the product where the relative humidity is 30 to 90% (No Dewdrop).
5. Avoid places where the product is subjected to direct sun light.
6.
Avoid penetration of metal chips when processing mounting holes.
7. Avoid places where the products is subjected to penetration of liquid, foreign substance or corrosive gas.
DLP/E Series
Instruction Manual
CAUTION
DWG NO. : CA733-04-01/E-F
APPD
TDK-Lambda
DLP/E Series
INSTRUCTION MANUAL
CHK DWG