Table des Matières
Publicité
Liens rapides
DLP Series Instruction Manual
DRB-480 Handbook
ENGLISH
General Safety Instructions:
READ SAFETY INSTRUCTIONS
Servicing:
These products are not customer serviceable TDK-Lambda UK LTD and their authorised agents only are permitted
to carry out repairs.
Critical Components:
These products are not authorised for use as critical components in nuclear control systems, life support systems or
equipment for use in hazardous environments without the express written approval of the Managing Director of TDK-
Lambda EMEA.
Product Usage:
These products are designed for use within a host equipment which restricts access to authorised competent
personnel.
This product is a component power supply considered apparatus and is only to be installed by qualified persons
within other equipment and must not be operated as a stand-alone product.
This product is for sale to business to business customers and can be obtained via distribution channels.
It is not intended for sale to end users.
This product is considered to be apparatus and complies with the EMC directive. Compliance with the EMC directive
must be considered in the final installation. Please contact your local TDK-Lambda office
Environmental:
These products are IPX0, and therefore chemicals/solvents, cleaning agents and other liquids must not be used.
Environment:
This power supply is a switch mode power supply for use in applications within a Pollution Degree 2, overvoltage
category II environment. Material Group IIIb PCB's are used within it.
Output Loading:
The output power taken from the power supply must not exceed the rating stated on the power supply label, except
as stated in the product limitations in this handbook.
Input Parameters:
This product must be operated within the input parameters stated in the product limitations in this handbook.
End of Life Disposal:
The unit contains components that require special disposal. Make sure that the unit is properly disposed of at the
end of its service life and in accordance with local regulations.
CA733-04-01/E-F (a)
Publicité
Table des Matières
Manuels Connexes pour TDK-Lambda DLP Série
Sommaire des Matières pour TDK-Lambda DLP Série
- Page 1 General Safety Instructions: READ SAFETY INSTRUCTIONS Servicing: These products are not customer serviceable TDK-Lambda UK LTD and their authorised agents only are permitted to carry out repairs. Critical Components: These products are not authorised for use as critical components in nuclear control systems, life support systems or equipment for use in hazardous environments without the express written approval of the Managing Director of TDK- Lambda EMEA.
-
Page 2: Risk Of Electric Shock
Internal fuses protect the unit and must not be replaced by the user. In case of internal defect, the unit must be returned to TDK-Lambda UK LTD or one of their authorised agents. A suitable mechanical, electrical and fire enclosure must be provided by the end use equipment for mechanical, electric shock and fire hazard protection. - Page 3 Allgemeine Sicherheitsvorschriften: LESEN SIE DIE SICHERHEITSVORSCHRIFTEN Wartung: Diese Produkte können nicht durch den Kunden gewartet werden. Nur TDK-Lambda UK LTD. und deren zugelassene Vertriebshändler sind zur Durchführung von Reparaturen berechtigt. Kritische Komponenten: Diese Produkte sind nicht für die Verwendung als kritische Komponenten in nuklearen Kontrollsystemen, Lebenserhaltungssystemen oder Geräten in gefährlichen Umgebungen geeignet, sofern dies nicht ausdrücklich und...
-
Page 4: Gefahr Durch Elektrischen Schlag
Die Abdeckung des Gerätes/das Gehäuse darf für den Benutzer nicht zugänglich sein. Eine interne Sicherung schützt das Gerät und darf durch den Benutzer nicht ausgetauscht werden. Im Fall von internen Defekten muss das Gerät an TDK-Lambda UK LTD oder einen der autorisierten Vertriebshändler zurückgeschickt werden. -
Page 5: Lire Les Consignes De Securite
Consignes générales de sécurité: LIRE LES CONSIGNES DE SECURITE Entretien: Ces produits ne peuvent pas être réparés par l’utilisateur. Seuls, TDK-Lambda UK LTD et ses agents agréés sont autorisés à effectuer des réparations. Composants critiques: Ces produits ne doivent pas être utilisés en tant que composants critiques dans des systèmes de commande nucléaire, dans des systèmes de sauvetage ou dans des équipements utilisés dans des environnements dangereux,... -
Page 6: Risque De Choc Electrique
Un fusible interne protège le module et ne doit pas être remplacé par l'utilisateur. En cas de défaut interne, le module doit être renvoyé à TDK-Lambda UK LTD ou l'un de ses agents agréés. Une enceinte appropriée doit être prévue par l'utilisateur final pour assurer la protection contre les chocs mécaniques, les chocs électriques et l'incendie. - Page 7 Questo prodotto non è inteso per la vendita al dettaglio o agli utilizzatori finali. Questo prodotto è da considerarsi come apparato e conforme con la direttiva EMC. Conformità alla direttiva EMC deve essere considerata nell'installazione finale. Gli uffici di TDK-Lambda Sas Succursale Italiana sono a vostra disposizione per ulteriori ragguagli.
- Page 8 Un fusibile interno protegge l'unità e non deve essere sostituito dall'utente. Nell'eventualità di un difetto interno, restituire l'unità a TDK-Lambda UK LTD o a uno dei suoi agenti autorizzati. L'apparecchiatura finale deve includere una recinzione meccanica, elettrica e antincendio per proteggere dai pericoli di natura meccanica, dalle scosse elettriche e dai pericoli di incendio.
- Page 9 Instrucciones generales de seguridad: LEA LAS INSTRUCCIONES DE SEGURIDAD Servicio: Estos productos no pueden ser reparados por los clientes. TDK-Lambda UK LTD. y sus agentes autorizados son los únicos que pueden llevar a cabo las reparaciones. Componentes fundamentales: Estos productos no pueden ser utilizados como componentes fundamentales en sistemas de control nuclear, sistemas de soporte vital o equipos a utilizar en entornos peligrosos sin el consentimiento expreso por escrito del Director General de TDK-Lambda EMEA.
- Page 10 Un fusible interno protege la unidad y este no debe ser nunca reemplazado por el usuario. En caso de existir algún defecto interno, la unidad debe ser enviada a TDK-Lambda UK LTD o a uno de sus agentes autorizados. El equipo de uso final debe constituir un recinto de protección mecánica, eléctrica y contra incendios de protección mecánica, contra descargas eléctricas y contra el peligro de incendios.
- Page 11 Instruções gerais de segurança: LEIA AS INSTRUÇÕES DE SEGURANÇA Manutenção: Estes produtos não são podem ser submetidos a manutenção por parte do cliente. Apenas a TDK-Lambda UK LTD e os seus agentes autorizados têm permissão para realizar reparações. Componentes essenciais: Não é...
-
Page 12: Risco De Choque Eléctrico
Existe um fusível interno que protege a unidade e que não deve ser substituído pelo utilizador. Em caso de defeito interno, a unidade deve ser devolvida à TDK-Lambda UK LTD ou a um dos seus agentes autorizados. O equipamento de utilização final deve fornecer um bastidor com protecção mecânica, eléctrica e contra incêndios adequada. -
Page 13: Warning Symbols
TDK-Lambda DLP/E Series INSTRUCTION MANUAL DLP/E Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit or a fire hazard. - Page 14 TDK-Lambda DLP/E Series INSTRUCTION MANUAL 8. Avoid places subject to shock or vibration. A device such as a contact breaker may be a vibration source. Set the Power Supply as far as possible from possible sources of shock or vibration.
- Page 15 TDK-Lambda DLP/E Series INSTRUCTION MANUAL 1-2.2 DLP100/C2E +V: +Output terminal - V: - Output terminal V.ADJ: Output voltage adjust trimmer The output voltage rises when a trimmer is turned clockwise. L: AC Input terminal Live line (fuse in line) N: AC Input terminal...
- Page 16 TDK-Lambda DLP/E Series INSTRUCTION MANUAL 1-2.3 DLP120/E 1-3.1 DLP180/E DC ON V.ADJ Output Details Continuous Loading 24VDC/7.5A V.ADJ DC ON IND.CONT.EQ. 45JB BAR CODE Made in China BAR CODE Input Details IND.CONT.EQ. 45JB 100-240VAC 2.7A Maximum Power Factor Corrected Frequency : 50/60Hz...
- Page 17 TDK-Lambda DLP/E Series INSTRUCTION MANUAL 1-4.1 DLP240/E 2. Terminal Connecting Method Pay attention to the input wiring. If it is connected to wrong terminal, the power supply will be damaged. • Input must be off when making connections. • Connect FG terminal of input connector and mountable FG to ground terminal of the equipment.
- Page 18 TDK-Lambda DLP/E Series INSTRUCTION MANUAL 2-2.2 DLP100/C2E 2-1.2 DLP75/C2E DC ON DC ON BAR CODE BAR CODE IND.CONT.EQ. IND.CONT.EQ. 45JB 45JB 2-2.3 DLP120/E 2-2.1 DLP100/E V.ADJ V.ADJ DC ON DC ON BAR CODE BAR CODE IND.CONT.EQ. IND.CONT.EQ. 45JB 45JB...
- Page 19 TDK-Lambda DLP/E Series INSTRUCTION MANUAL 2-3.1 DLP180/E 3. Explanation of Functions and Precautions 3-1. Input Voltage Range Input voltage range is single phase 85 ~ 132VAC/ 170 ~ 265VAC ( 47 ~ 63Hz ) (DLP75/E, DLP100/E, DLP120/E) or 85 ~ 265VAC (DLP180/E, DLP240/E). Input voltage which is out of specification may cause unit damage.
-
Page 20: Parallel Operation
TDK-Lambda DLP/E Series INSTRUCTION MANUAL 3-6. Output Ripple & Noise 3-8. Parallel Operation The standard specification for maximum ripple value is (A) To increase the output current is not possible. measured according to measurement circuit specified by JEITA-RC9131. When load lines are longer, ripple becomes larger. -
Page 21: Alarm Indication
TDK-Lambda DLP/E Series INSTRUCTION MANUAL Output ~ FG (Chassis) AC(L) 500VAC 1min. (100mA) AC(N) Isolation Tester AC(L) AC(N) Withstand Voltage 3-10. Withstand Voltage Tester This series is designed to withstand 3.0kVAC between input and output, 2.0kVAC between input and FG (Chassis) and 500VAC between output and the FG (Chassis) each for 1 minute. - Page 22 TDK-Lambda DLP/E Series INSTRUCTION MANUAL Normal mounting (A) 85~132VAC or DLP75/C2E 170~265VAC Air Flow 25mm 25mm or more or more V.ADJ V.ADJ V.ADJ DC ON DC ON DC ON BAR CODE BAR CODE BAR CODE IND.CONT.EQ. IND.CONT.EQ. IND.CONT.EQ. 45JB 45JB 45JB Ambient Temperature (°C)
-
Page 23: Wiring Method
TDK-Lambda DLP/E Series INSTRUCTION MANUAL 6. External Fuse Rating DLP180/E Refer to the following fuse rating when selecting the external 85~265VAC fuses that are to be used on input line. Surge current flows when line turns on. Use slow-blow fuse or time-lag type fuse. - Page 24 TDK-Lambda DLP/E Series INSTRUCTION MANUAL (2) Slide it downward until it hits the stop. 8.Before concluding that the unit is at fault... Before concluding that the unit is at fault, make the (3) Press against the bottom front side for locking.
- Page 25 TDK-Lambda DLP/E Series INSTRUCTION MANUAL 11. DLP series UL508 Listed Condition 1) Wire Requirement • Use minimum 60°C or 60/75°C wire • Use copper conductor only 2) For use in a Pollution degree 2 environment only 3) Indoor use only...