Westfalia 304 054 300 107 Instructions De Montage page 17

Installation Instructions: Electrical System for Towing Hitch
Connecting the tail lights
12. Reconnect the Y-connector to the cable harness using the white 4/2-pin plug.
13. Unplug the plug of the right and left tail light (Fig. 1/6+9) and connect it to its counterpart on
the cable harness. Make sure that the plugs lock firmly into place. Plug the residual plugs
back into the tail lights.
Connecting the trailer module
14. Plug the 12-pin plug into the trailer module.
15. Fasten the trailer module (Fig. 1/3) to the left-hand side of the luggage trunk using some
velcro tape.
16. Connect the brown and brown/white cable with the eyelet to the vehicle's ground point
(Fig. 1/4).
17. Lay the red cable from the 12-pin plug to the battery.
18. Let the quick-connect receptacle of the red cable (Fig. 2/5) of the cable harness and the one
of the supplied single red cable (Fig. 2/4) lock into place in the fuse holder.
19. Fit the yellow clip (Fig. 2/6).
20. Insert the fuse (Fig. 2/2) and fit the cover (Fig. 2/1).
21. Screw the single red cable onto the positive battery terminal.
Note
Ensure sufficient strain relief and correct installation of the fuse holder.
Checking correct operation
22. Reconnect the ground of the vehicle's battery.
23. Check the trailer function with the help of a suitable test instrument (with load resistors) or
with the help of a trailer.
24. Secure all cables using cable ties.
25. Refit any parts removed for installation.
Citroen Berlingo 304 054 391 102 - 001 - 04/08 17