Perel CFAN045H2O Mode D'emploi page 6

2. To adjust height, loosen the height adjustment collar [h], raise the inner pole [g] to the
desired height and retighten the collar.
3. Now, attach the fan head. Align the two push buttons [j] on the fan head support with the
two holes [i] in the telescopic pole. Press the buttons with your fingers and insert the fan
head support into the inner pole until the push buttons pop out of the holes.
Assembling the Misting Hose
1. Attach the supplied sprinkler adaptor [n] to the end of the misting hose [k] valve and then
to a 12 mm garden hose adaptor [l].
2. Close the valve handle [m] before opening the water tap.
6. Operation
Installation
Install the appliance on a dry, level surface and connect to an appropriate electrical outlet.
not use on carpet as the mist may affect the floor covering.
V. 02 – 13/01/2020
CFAN045H2O
6
Do
©Velleman nv