Problems And Causes - BORETTI B400 Mode D'emploi

« PROBLEMS AND CAUSES
PROBLEM
Coffee does not come
out.
Coffee comes out
around the edge of the
porta-filter.
Milk is not foamy
after frothing or it is
not coming out of the
frothing tube
Coffee comes out
too quickly
Coffee is too weak.
The three control panel
lights are flashing
alternatively
CAUSES
1. No water in reservoir.
2. Coffee grind is too fine.
3. Too much coffee in the
filter.
4. Appliance was not turned
on or plugged in.
5. Coffee has been tamped/
compressed too much.
6. Orange silicon rubber was
not removed.
1. Porta-filter not rotated to
full lock position.
2. Coffee grounds around the
filter basket rim.
3. Too much coffee in the
filter.
1. Ran out of steam
2. Milk is not cold enough.
3. Frothing tube is blocked.
1. Ground coffee is too
coarse.
2. Not enough coffee in filter.
1. Using small filter for dou-
ble shot of espresso
2. Ground coffee is too
coarse.
Water tank is out of water.
SOLUTIONS
1. Add water
2. Grind medium ground
coffee.
3. Fill filter with less coffee.
4. Plug unit into electrical
outlet and turn it on.
5. Refill filter basket with
coffee, do not tamp too
much.
6. Remove orange rubber sil-
icon from water reservoir.
1. Rotate filter holder to full
lock position.
2. Wipe off rim and brewing
head.
3. Fill with less coffee.
1. Ensure there is enough
water in the reservoir.
2. Chill milk and frothing
pitcher prior to making
cappuccino.
3. Follow the instructions to
clean the milk reservoirs &
frothing tube.
1. Use a finer grind.
2. Use more coffee.
1. Use large filter for double
shot of espresso
2. Use a finer grind.
Add water to reservoir.
63
EN