Connections And Installation; Connecting To An Integrated Amplifier Or Component System - Technics SL-1200G Mode D'emploi

Connections and installation

 Turn off all units and disconnect the AC mains lead from the socket before making any
connections.
 Connect the AC mains lead only after all other connections are completed.
 Be sure to connect the PHONO earth lead. Otherwise mains hum may occur.
 Refer also to the instruction manual of the connected device.
1
Connect the PHONO cables and
PHONO earth lead to the PHONO
terminals of the connected
equipment.
 You will not have adequate volume or
sound quality if the connected amplifier
has no PHONO terminals.

Connecting to an integrated amplifier or component system

Amplifier (not included)
VOLUME
PHONES 5V 2.1A
PHONO PHONO
EARTH
R
Note
 The operation switch does not separate entire unit from mains even if in "OFF" position.
Remove the plug from the mains socket if you will not be using the unit for an extended period of
time. Place the unit so that the plug can be easily removed.
14
(14)
English
INPUT SELECTOR
R
L
PHONO cable
PHONO earth lead
2
Connect the AC mains lead.
 Confirm the wattage of the AC outlet on
the connected equipment before using it
for this unit.
(This unit consumes 14 W.)
Back of main unit
L
Insert the AC mains lead
up to a point just before
the round hole.
To a household
mains socket