AEG DB17 Série Mode D'emploi page 9

TROUBLESHOOTING
PROBLEM
The soleplate is not heating even
though the iron is turned on.
The iron does not produce steam. Not enough water in tank.
The spray function does not
work.
The steam jet and vertical steam
jet functions does not work.
Brown streaks come out of the
soleplate while ironing and stain
the linen.
DISPOSAL
This symbol on the product indicates that this product contains a battery which shall not be disposed with
normal household waste.
This symbol on the product or on its packaging indicates that the product may not be treated as household
waste. To recycle your product, please take it to an official collection point or to an AEG service center that
can remove and recycle the battery and electric parts in a safe and professional way. Follow your country's
rules for the separate collection of electrical products and rechargeable batteries.
AEG reserves the right to change products, information and specifications without notice.
www.aeg.com
POSSIBLE CAUSE
Connection problem.
The temperature selector is in "MIN"
position.
Steam selector is set in non-steam
position.
The selected temperature is lower than
that specified to use with steam.
Not enough water in tank.
The steam jet function was used very
frequently within a short period.
The iron is not hot enough.
You have used hard water, which has
caused scale flakes to develop in the
water tank.
You have used chemical descaling
agents.
Fabric fibres have accumulated in the
holes of the soleplate and are burning.
The fabrics might not be properly rinsed
or the garments are new and have not
been washed before ironing.
SOLUTION
Check the main power supply cable, plug, and
outlet.
Select adequate temperature.
Fill the water tank (see "Getting started", no 2).
Set the steam selector between positions of
minimum steam and maximum steam (see
"Ironing chart").
Increase the temperature to at least
Fill the water tank (see "Getting started", no 2).
Put the iron in a horizontal position and wait
before using the steam jet function.
Adjust the proper temperature to steam ironing
(up to ). Put the iron in vertical position
and wait until the temperature indicator light
turns off.
Use the self-clean function one or more times.
Do not use any descaling agents.
Use the self-clean function one or more times.
Clean the soleplate with a damp soft cloth.
Please rinse the laundry properly again.
GB
DE
AR
ES
FA
FR
.
GR
NL
PT
9