Selecting The Input Mode - Yamaha Digital Sound Projector YSP-3000 Mode D'emploi

You can select the type of audio input signals of the selected input source according to your preference or the conditions
of the input source. This function is available for TV/STB, DVD, AUX1, and AUX2.
y
We recommend setting the input mode to AUTO in most cases.
DVD AUX1
STB TV
PRESET/TUNE
FM/XM CAT
AUTO
VOL MODE SETUP
5BEAM ST+3BEAM
1
STEREO
4
MUSIC
7
OFF
0
ENHANCER
CAT/
A-E
DISPLAY
(U.S.A. and Canada models)
1
Set the operation mode selector to YSP.
TV/AV
YSP
2
Press one of the input selector buttons to
select the desired input source.
DVD AUX1
STB

Selecting the input mode

AV TV
DOCK
AUX2 AUX3
TV
INPUT1 MACRO
SEARCH MEMORY
INPUTMODE SLEEP
3BEAM
2 3
MY BEAM MY SUR.
5 6
MOVIE SPORTS
8 9
SUR. DECODE
+10
ENTRY MENU
TV/AV
ENTER
YSP
RETURN
AUX2
TV
3
Press INPUTMODE repeatedly to toggle
between input modes.
INPUTMODE
DVD AUTO
DVD DTS
When DVD is selected
as the input source
AUX1 AUTO
AUX1 DTS
AUX1 ANALOG
When AUX1 is selected
as the input source
Note
ANALOG is not available as the input mode of DVD and
AUX2.
• AUTO
Automatically selects audio input signals in the following
priority order:
1) HDMI
2) Digital
3) Analog
y
Use this input mode in most cases.
• DTS
Selects only digital signals encoded in DTS.
Compared to AUTO, this input mode provides greater
stability while playing back CDs or LDs encoded in DTS.
• ANALOG
Selects only analog signals.
Even when both digital and analog signals are input
simultaneously, only analog signals are selected.
y
You can adjust the default input mode to be selected when the
power of this unit is turned on by adjusting INPUT MODE in
INPUT MENU (see page 80).
Selecting the input mode
TV/STB AUTO
TV/STB DTS
TV/STB ANALOG
When TV or STB is selected
as the input source
AUX2 AUTO
AUX2 DTS
When AUX2 is selected
as the input source
87
En