Use And Maintenance - Gima VISIO 5 PLUS Manuel De L'utilisateur

9

USE AND MAINTENANCE:

Before removing the diagnostic unit, make sure the switch is in the OFF position.
Any unauthorized changes may cause a short circuit that may damage the unit, therefore always
contact the authorized person or send the unit back to the manufacturer.
Switch off the unit completely before changing the lamp.
CLEANING:
Do not sterilize the product. It can be cleaned and disinfected using 70% isopropyl alcohol. Avoid using
abrasive cleaning materials.
1) Lens:
The lens can be cleaned using a moistened cotton-tipped applicator with a solution of water with mild
detergent. Do not use abrasive ultrasonic cleaners, alcohol or other chemicals to clean the
lenses as this degrades the lens or mirror quality by scratching the coated surface of the lenses.
2) handle with main unit:
Disconnect the unit from the mains before cleaning. The handle can be cleaned with a moist cloth. The
handle should not be dipped into water. While cleaning, make sure that the lamp is not soaked with water.
Periodically check the handle and unit.
Autoclaving and flash sterilizing the handle will result in severe electrical damage.
RECOMMENDED OPERATING ENVIRONMENT
Operation
Temperature 0°C to 40°C
Humidity 10% to 90%
Air Pressure 700hPa to 1000hPa
Caution: read instructions
(warnings) carefully
Manufacturer
Keep away from sunlight
Type BF applied part
Serial number
Disposal: The product must not be disposed of along with other domestic waste. The users
must dispose of this equipment by bringing it to a specific recycling point for electric and elec-
tronic equipment.
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
Storage and Transport
Temperature -20°C to 50°C
Humidity 15% to 95%
Air Pressure 700hPa to 1000hPa
Medical Device compliant
with Regulation (EU)
2017/745
Date of manufacture
Keep in a cool, dry place
Follow instructions for use
Class II applied
ENGLISH
Product code
Lot number
WEEE disposal
Medical Device