Fortress Building Products PURE VIEW Instructions D'installation page 24

Fig. 3
1"
[25.5mm]
Step 3: Install UB-05 Angle Adapter
1. Attach Angle Adapter Base piece to the posts with supplied
T-25 thread-cutting screws. Use low speed setting on drill.
As shown in Fig. 1.
2. Assemble Angle Adapter Body piece & Base piece.
As shown in Fig. 2.
3. Attach UB-05 Bracket to Angle Adapter using T-25
thread-cutting screws. As shown in Fig. 3.
Tip:
• Use a Bit Extender for an easier drilling process.
Fig. 1
Fig. 3
24
Pre-Drill
with a 3/16"
[4.5mm]
drill bit
CB-05 Angled
Bracket
PURE VIEW: Fe GLASS BALUSTER INSTALLATION
26
Fig. 2