Alecto DVC-105 Mode D'emploi page 25

4. TO MOUNT THE CAMERA ON A FIXED SPOT.
The camera may be placed on any horizontal surface.
Attention: Make sure the camera is already registered to the Wi-Fi network. When
the camera is installed and then connected to the mains, it'll re-establish the
connection with the network. Please first check whether a proper connection can be
established with your Wi-Fi router.
Underneath the foot of the camera you'll find a mounting panel for mounting the
camera. Rotate the panel anti-clockwise to remove the mounting panel. Make sure
to properly fix the mounting panel onto the wall with the screws to ensure that the
camera is pointing in the right direction. After mounting the camera, it can no longer
be rotated on its foot. However, you can still increase of decrease the camera's
height. The camera is replaced on the foot with a rotating movement.
The camera lens can be rotated to straighten up the image.
25