Amplifier Operations; Selecting A Component - Sony TA-VE700 Mode D'emploi

Amplifier Operations

Amplifier Operations

Selecting a Component

To listen to or watch a connected component, first
select the function on the amplifier or with the remote.
Before you begin, make sure you have:
• Connected all components securely and correctly as
indicated on pages 4 to 7.
• Turned MASTER VOLUME to the leftmost position
(0) to avoid damaging your speakers.
POWER
SPEAKERS PHONES
1
Press POWER to turn on the amplifier.
2
Press a function button to select the component
you want to use:
To listen to or watch
Records
Radio programmes
Compact Discs (CD)
Audio tapes
or MiniDiscs (MD)
Video tapes, etc.
TV programmes or laser discs
3
Turn on the component, for example, a CD player,
and then start playing.
4
Turn MASTER VOLUME to adjust the volume.
To adjust the volume of the TV's speakers, use the
volume control on the TV.
To
Mute the sound
Reinforce the bass
Adjust the balance
8 EN
MASTER VOLUME
Function buttons
Press
PHONO
TUNER
CD
TAPE/MD
VIDEO 1, VIDEO 2,
or VIDEO 3
TV/LD
Do This
Press MUTING on the remote.
Press again to restore the sound.
Press BASS BOOST to turn on
the BASS BOOST indicator.
Turn the BALANCE to the right
or left.
When you listen with headphones
Connect the headphones to the PHONES jack and set
the SPEAKERS selector to OFF.
Watching video programmes
When you watch TV or video programmes, we
recommend you play audio portion through the
amplifier instead of your TV's speaker. This lets you
take advantage of the amplifier's surround sound
effects, like Dolby Surround, and lets you use the
amplifier's remote to control the audio.
Turn off the speakers on your TV before you start so
you can enjoy the surround sound from your amplifier.
To watch TV programmes, turn on both the TV and the
amplifier and press the TV/LD button on the amplifier.
To watch videos or laser discs, do the following:
1
Press a function button to select the component
(for example, VIDEO 1).
2
Turn on the TV and set the TV's video input to
match your video component.
3
Turn on the component (VCR or LD player), and
start playback.
Using the remote
The remote lets you operate the amplifier and the
connected Sony components that can be controlled
with the remote commander.
TV CONTROL
ON
1
Press one of the SYSTEM CONTROL/
FUNCTION buttons to select the component you
want to use.
The amplifier and the selected component turn
on.
The SYSTEM CONTROL/FUNCTION buttons on
the remote are factory-set as follows:
SYSTEM
OFF
SYSTEM
CONTROL/
FUNCTION