Intermatic Grasslin B15 Notice D'utilisation page 97

7. If astro correction is activated, select the desired setting and confirm with
Possible settings for astro correction
Setting
hh:mm --
hh:mm
hh:mm
hh:mm
hh:mm
8. Select the specification of the desired astro correction setting and confirm with
9. Set the day(s) of the week (⋀/⋁) on which the switching time should apply, and confirm with
The days of the week 1 – 5, 6 – 7 and 1 – 7 are set by default. Individual days of the week
can be set (+/-) under menu item "Select days".
10. Select channel (+/-) for which the switching time is to be set, and confirm with
The channel selection is only displayed if there are two or more channels.
+ Active channel
– Inactive channel
11. To create a new switching time, select
12. Adopt the automatically suggested priority and confirm with
You can only select a priority in advanced mode (Ä Chapter „Prioritising programmes" on
page 95).
Effect
Correction is deactivated.
The switching command is only executed if sunrise takes place after the set time.
The switching command is only executed if sunrise takes place before the set time.
The switching command is only executed if sunset takes place after the set time.
The switching command is only executed if sunset takes place before the set time.
and confirm with
YES
.
OK
.
OK
.
OK
.
OK
or adjust the priority.
OK
EN
.
OK
97