Citizen CT-S801 II Mode D'emploi page 70

Switch no.
MSW9-4 Multi-byte Char
MSW9-6 LCD Language
MSW9-7 LCD Ext Char
MSW9-8 LCD Auto Off
MSW10-1 Print Density
MSW10-2 Print Speed
MSW10-3 ACK Timing
MSW10-4 Old command
MSW10-5 Buzzer Event
MSW10-6 Buzzer Sound
MSW10-7
MSW10-8 LCD Direction
MSW13-1 Security/Target
MSW13-5 BT Device Scan
MSW13-6 Auto Reconnect
Notes:
*1: If print data is very dense, the print head is hot, data transmission is slow, or some other
conditions, the motor and printing may occasionally stop which causes white stripes in the
printout. To print high-density data, set MSW2-3 (Spool Print) to ON to reduce striping, although
this increases the time before printing starts.
For a serial interface, increase the transmission speed to prevent the motor from stopping.
*2: Label printing
*3: Black mark model
*4: The values for memory switches MSW7-X are only effective when DIP switch no. 1 is set to OFF .
Function Initial setting
Invalid
English
Valid
Never
100 %
Level 9
Before Busy Before Busy, Same Period, After Busy
Invalid
Not by
C.Open
Tone 2
Key Lock Invalid
Normal
Low/All
Discoverable No Response, Discoverable
Valid
JIS(JPN), SJIS:CP932 (JPN), SJIS:X0213(JPN),
GB18030(CHN), KS Hangul(KOR), EUC Hangul(KOR),
BIG5(TWN), Invalid
English, Français, Deutsch, Italiano, Español,
Japanese, Chinese
Invalid, Valid
Never, 30seconds, 5minutes
70 %, 75 %, 80 %, 85 %, 90 %, 95 %, 100 %, 105 %,
110 %, 115 %, 120 %, 125 %, 130 %, 135 %, 140 %
Level 1, Level 2, Level 3, Level 4, Level 5, Level 6,
Level 7 , Level 8, Level 9
Invalid, CBM1, CBM2
All Event/Error, Not by C.Open, Not by C.Open/PE
Tone 1, Tone 2, Tone 3, Tone 4
Invalid, Valid
Normal, Inverted
Low/All, Mid/All, Mid/Paired only, Hi/All, Hi/Paired only
Invalid, Valid
— 66 —
Setting value