3.15
Selecting a Paper Type
Select a paper type in "Paper select" in the Function Test Mode to change the
type of paper being used.
1.
Load paper.
2.
While holding down button 1, turn on the power.
The function test mode starts and "Self test" appears on the LCD.
3.
Press button 3 (
"Paper select" appears on the LCD.
4.
Press button 4 (
"Thermal roll" appears on the LCD.
5.
Each press of button 3 (
follows:Thermal roll → Black mark → Label → Thermal roll.
Keep pressing button 3 (
6.
Press button 4 (
) three times.
).
) cycles through the paper types on the LCD as
) until the paper type you want to use is displayed.
).
Refer to 3.13 Loading Paper
— 44 —