Attaching The Power Switch Cover; Attaching The Interface Cover - Citizen CT-S801 II Mode D'emploi

3.16

Attaching the Power Switch Cover

Attach this cover to prevent the power switch from being used.
1. Press the power switch cover onto the power switch compartment until it clicks.
Put a screwdriver or other pointed object into the grooves on the power switch
cover to remove it.
3.17

Attaching the Interface Cover

Attach the interface cover to the back of the printer.
The shape of the interface cover is different depending on the type of power
source.
1. Press the interface cover as shown in the diagram until you hear it click.
Power switch cover
CT-S801IIS
— 45 —