Husqvarna PG 690 Manuel D'utilisation page 14

To do a check of the of the emergency stop button on
the remote control
1. Turn the emergency stop button on the control panel
clockwise to make sure that the emergency stop
button is disengaged.
2. Turn the emergency stop button on the remote
control clockwise to make sure that the emergency
stop button is disengaged.
3. Turn the ON/OFF switch (A) on the control panel to 1
to start the motor. The LED adjacent to the ON/OFF
switch comes on.
4. Turn the remote control/manual operation switch (B)
on the control panel clockwise for remote control
operation. The LED adjacent to the remote control/
manual operation switch flashes.
14
5. Push the ON/OFF button (C) on the remote control.
6. Push the emergency stop button (D) on the remote
7. Make sure that LED adjacent to the ON/OFF switch
8. Turn the emergency stop button on the remote
Locking pins for the wheels
The locking pins lock the wheels to the motor when the
product is operated with the remote control.
To do a check of the locking pins for the wheels
1. Make sure that the locking pins are not engaged.
2. Push the product slightly forward and feel the
B
A
The remote control is on when the display comes on.
C
control.
on the control panel goes off.
control clockwise to disengage.
resistance.
D
1163 - 004 - 01.10.2020