Grease Filters; Carbon Filter; Led Lighting - Pelgrim BKE951RVS Notice D'utilisation

MAINTENANCE
Removing the grease filters
Replacing the carbon filter

LED lighting

Switch off the electricity! Remove the plug from the mains socket or
turn the switch in the meter cupboard to zero. Release the lock of the
fat filer and tilt the filter downwards.
The carbon filter must always be used if the cooker hood is not ducted.
• Remove the grease filters
• Attach the carbon filters to the filter.
• Replace the grease filters.
Note:
• Saturation of the activated charcoal will eventually occur after
prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• The carbon filter needs to be replaced at least every four months.
• The carbon filter cannot be washed for reuse. Saturated carbon is
not environmentally friendly. Change the filter regularly.
The LED lighting should only be replaced by an authorised
installer.
EN 9