Maintenance Interval - Dolmar PS-352 Mode D'emploi

MAINTENANCE INTERVAL

For tool's long life, and to ensure the full functioning of the safety features, perform maintenance work regularly.
Operating
time
Item
Inspection.
Chain saw Cleaning.
Check at authorized service center.
Saw chain Inspection. / Sharpening if necessary.
Guide bar Inspection.
Check the function.
Chain brake
Have it inspected regularly at authorized service
center.
Starter rope Inspection.
Chain lubrication Check the oil feed rate.
Combination
Inspection.
switch
Throttle trigger
Inspection.
lock-out
Throttle trigger Inspection.
Fuel tank cap Check tightness.
Oil tank cap Check tightness.
Air cleaner Cleaning.
Idle speed The saw chain does not move at idle speed.
Cylinder space Cleaning.
Spark plug Inspection. / Cleaning. / Replace if necessary.
Spark arrester Inspection. / Cleaning. / Replace if necessary.
Muffler Check tightness of screws.
Chain catcher Inspection.
Screws and nuts Inspection.
Fuel filter Inspection. / Replace if necessary.
Fuel tank Empty.
Carbretor Run empty.
* Before emptying oil, check for a suitable way to dispose of old oil. Do not pour it down into sewage drains, onto garden soil or onto open
streams. Your local zoning or environmental regulations will give you more detailed instructions on proper disposal.
Before Every
Everyday
operation week
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
25
Every Before
Annually
3 month storage
○
○
○
○
○
○
○