Checking The Drive Mechanics; Inserting The Flight Battery - Reely SKY Exceed Notice D'emploi

b) Checking the Drive Mechanics
Before commissioning your model helicopter, you need to check
the drive mechanics. Only if the mechanics work securely, without
play and absolutely smoothly can be model fly with the lowest
possible energy expenditure. For this reason, you should check
the model function before each flight.
For this, carefully turn the main rotor back and forth and check the
interaction of the main gear (1) and the motor pinion (2). The gears
must securely fit into each other without catching or showing too
much friction. The motor shaft with the drive pinion must be aligned
perfectly straight and must not be eccentric.
The centrifugal weight rod (3) at the upper rotor must be aligned
precisely straight and its ends must be easy to move up and down.
The linkage levers of the upper rotor (4) must not be difficult to
move or catch in any position.
c) Inserting the Flight Battery
The charged flight battery (1) is slid into the battery holder (2)
below the skid brackets. The battery connection (3) must point
backwards.
Slide the battery forwards until the plastics collar of the battery is
flush with the rear holder and the latching hook (4) keeps the
rechargeable battery safely in position.
46
Figure 7
Figure 8