Operating - Bartscher Top Juicer 150.145 Mode D'emploi

•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.

5.3 Operating

Before first use, clean the unit as described in 6.2 "Cleaning".
CAUTION!
If the unit is to stay unused or if sub-assemblies are to be attached or detached,
disconnect the unit from its socket.
Assembly
•
While assembling, follow the instructions in
the diagram located to the right.
•
Place the motor housing
flat surface. Press down on the motor
①
housing until the suction legs are
securely attached to the surface.
•
Place the pressings container
appropriate bracket located on the motor
housing. For easier cleaning a plastic bag
can be placed inside the pressings
container.
•
Attach the sieve housing
①
housing so that the exit chute is located
above the pressings container.
•
Place the sieve
⑪
housing and press until it locks in place.
WARNING! Danger of injury!
The knives in the sieve are very sharp. To
avoid injury, be very careful when handling
the sieve.
- 26 -
①
on a dry,
⑬
on the
⑪
on the motor
⑧
carefully in the sieve
⑤
⑧
⑪
⑬
④
②
①