ETNA KI680ZT Mode D'emploi page 48

SETTINGS
Acoustic signal and alarm volume (loudness) 'Uo'
The following values can be set:
▷ 00 on the display = off (does not apply to alarm and error acoustic signal)
▷ 01 on the display = minimum volume
02 on the display = medium volume
▷
03 on the display = maximum volume (default)
▷
• The first digit appears on the right rear display and the second digit on the right front
display.
• A short acoustic signal will be sounded upon every change, with the newly set volume.
Acoustic alarm duration 'So'
The following values can be set:
05 on the display = 5 seconds
▷
1.0 on the display = 1 minute
▷
2.0 on the display = 2 minutes (default)
▷
Child safety lock 'Lo'
If the automatic lock function is activated in the user settings mode, the cooking hob will be
automatically locked every time it is switched off.
▷ 00 on the display = off (default)
01 on the display = on
▷
Total maximum power 'Po"
If the electric installation in your home has different current limits, maximum power consumption
of the cooking hob can be reduced:
▷ 2.3 on the display = 2.3 kW (10 A)
▷ 2.8 on the display = 2.8 kW (12 A)
▷ 3.0 on the display = 3.0 kW (13 A)
▷ 3.7 on the display = 3.7 kW (16 A)
only for models: KIF670ZT / KIF670DS / KI680ZT / KIF680DS
7.4 on the display = 7.4 kW (2x16 A) / preset for all appliances except KIS670ZT
▷
If the power level is limited, the settings and the resulting cooking power can be limited
as well. The appliance is fitted with a power management system that makes sure the
effect of power limiting is minimal.
EN 22