Residual Risk - Güde LS 36-302-30 Traduction Du Mode D'emploi D'origine

Operation
Provide adequate lighting or good lighting conditions
when working with the machine. Poor lighting/light
conditions represent a high safety risk.
Do not use the appliance in bad weather, especially
when there is a risk of storm.
WARNING
Risk of injury by rotating impeller.
• Keep your hands in safe distance.
• Never use the machine with a damaged cover or
protective device or without cover or protective
devices.
• Remove the battery pack before starting any
adjustment, cleaning and maintenance work on
the device.
• Wait until all rotating parts have stopped and the
appliance has cooled down.
When operating the machine, ensure that it is positi-
oned securely, in particular on slopes.
Avoid abnormal body posture.
Walk! Never run!
Be careful when going backwards – risk of tripping!
When working, keep the appliance firmly with both
hands and with a distance from your body.
When feeding material, never stand on a level higher
than the level of the base of the machine.
Before starting the machine, make sure that the
feeder is empty.
Keep your face and body away from the feeding
chute.
Do not allow hands, other parts of the body or
clothing to be placed in the feeder, in the ejection
channel or near moving parts.
Do not stand in the ejection zone when operating
the machine.
The protective equipment on the appliance is strictly
prohibited to be disassembled, changed, used in
conflict with the designation and it is prohibited to
attach any protective equipment of other manufac-
turers.
Always switch the machine off before attaching or
removing the collection bag.
Switch the machine off if it becomes blocked, before
removing the blockage. Do not transport the machi-
ne if the energy source is running.
Remove the rechargeable battery before carrying
out any setting, cleaning or maintenance work on
the device.
WARNING
If the appliance starts abnormally vibrating,
switch the engine off and search for the cause
immediately. Generally, vibrations are a warning
against operating failure.
Stop the device and disconnect it from the power
supply
• whenever you leave the lawnmower
• before removing blockages
• before checking, cleaning or working on the device
• after contact with a foreign object, to check the
device for damage
Removing blockages
In the event of a blockage, switch the device off
immediately and wait until the machine has stopped
completely. Then remove the object.
Maintenance and storage
Switch the machine off and do not touch any
moving, dangerous parts. Wait until the movement
has stopped completely and the device has cooled
down.
when you inspect the machine for damage;
if you are replacing or repairing damaged parts;
if you check for loose parts and tighten them;
Do not allow processed material to accumulate in the
ejection zone as this may prevent proper ejection
and cause the material to be reintroduced back
through the feed opening.

Residual Risk

Despite the observance of the operating instructions
there still may be some hidden residual risks.
DANGER
This power tool generates an electromagnetic
field during operation. Under certain circum-
stances, this field may affect active or passive
medical implants. To reduce the risk of serious
or fatal injury, we recommend that individuals
with medical implants consult your physician and
the manufacturer of the medical implant before
operating the machine.
CAUTION
Damage to health arising from vibrations to
hand and arms if the device is used for a long
time or if the device is not guided and evalua-
ted properly.
Vibration damping systems are no guaranteed
protection against white finger disease or carpal
tunnel syndrome. Therefore, it is necessary to
carefully check the state of your fingers and wrist
if you have regularly used the appliance for a long
time. If any symptom of the diseases above ap-
pears, seek medical advice immediately. To reduce
the white finger disease risk, keep your hands
warm and take regular breaks during your work.
ENGLISH
19