High Temperature Alarm; Door Open Alarm - ARTHUR MARTIN ANN2842ACW Notice D'utilisation

DrinksChill mode
The DrinksChill mode is to be used to set
an acoustic alarm at the preferred time,
useful for example when a recipe requires
to cool down a mixture for a certain period
of time, or when a reminder is needed in
order not to forget the bottles placed in the
freezer for fast cooling.
1. To switch on the function press ON/
OFF .
The DrinksChill indicator appears.
The timer shows the set value (30 min).
2. Press the temperature colder button
and temperature warmer button to
change the timer set value from 1 to
90 (min).
The timer indicator is shown (min).
At the end of the countdown the
DrinksChill indicator flashes and an
audible alarm sounds
3. Remove any drinks contained in the
freezer compartment.
4. Press ON/OFF to switch off the sound
and terminate the function.
It is possible to deactivate
the function at any time
during the countdown by
pressing ON/OFF. The
DrinksChill indicator goes
off.
It is possible to change the
time during the countdown
and at the end by pressing
the temperature colder
button and the temperature
warmer button.
FastFreeze mode
This function stops automatically after 52
hours.
To switch on the function:
1. Select the freezer compartment.
2. Press Mode until the corresponding
icon appears.
The FastFreeze indicator is shown.
3. To switch off the function before its
automatic end, repeat the procedure
The function switches off by
selecting a different freezer
set temperature.
ChildLock mode
To lock any possible operation through the
buttons select the ChildLock mode.
1. To switch on the function press the
fridge compartment and freezer
compartment button for few seconds.
The ChildLock mode indicator is shown.
2. To switch off the function press the
fridge compartment and freezer
compartment button for few seconds.
The ChildLock mode indicator goes off.

High temperature alarm

An increase in the temperature in the
freezer compartment (for example due to
an earlier power failure or opening of the
door) is indicated by:
• flashing the alarm and freezer
temperature indicators;
• sounding of buzzer.
To reset the alarm press any button.
The buzzer switches off.
The freezer temperature indicator shows
the highest temperature reached for a few
seconds. Then show again the set
temperature.
The alarm indicator continues to flash until
the normal conditions are restored.
When the alarm has returned
the alarm indicator goes off.

Door open alarm

An acoustic alarm will sound if the door is
left open for a few minutes. The door open
alarm conditions are indicated by:
• flashing Alarm light
• acoustic buzzer
When normal conditions are restored
(door closed), the alarm will stop.
During the alarm, the buzzer can be
switched off by pressing alarm button.
9