Battery Charger; Proper Use - Würth MLL12 Traduction Des Instructions De Service D'origine

Battery charger

Read all safety precautions and
instructions. Failure to observe precau-
tions and instructions may lead to
injury.
Protect the charger from rain
or moisture.
If water enters the charger, there is an
increased risk of electric shock.
Do not charge other batteries with
the charger. The charger is suited only to
charge batteries supplied with the laser. When
Keep the charger tidy. A soiled device
can cause an electric shock.
Always check charger, lead and plug
before using the device. Do not use
the charger when you detect any
damage. Do not open the charger
DQG KDYH LW UHSDLUHG E\ TXDOLÀHG
specialist personnel and with original
spare parts only. Damaged chargers,
leads and plugs increase the risk of an electric
shock.

Proper use

The device is designed for determining and check-
direction as well as rectangular lines and angles
using original Würth system accessories.
Any other use than that described shall be deemed
to be improper use.
The user is liable for damage resulting
from improper use.
Do not operate the charger on easily
ÁDPPDEOH VXUIDFHV HJ SDSHU
WH[WLOHV HWF RU LQ DQ ÁDPPDEOH
environment. Risk of burning due to high
temperatures generated by the charger during
charging.
,I XVHG LQFRUUHFWO\ ÁXLG PD\ HVFDSH
from the battery. Avoid contact with
it. Rinse with water after accidental
contact. If these liquids come in
contact with your eyes, seek medical
attention.
skin irritation or burns.
Only use genuine Würth accessories
and spare parts. When using non-
recommended accessories, you may receive
incorrect measuring values.
Components
Overview (fig. I)
1
2 5/8"-11 tripod connection and charging socket
3 Mounting feet
4 Fine adjustment
5
6 Button for operation with hand-held receiver
7 Status indication
8 Button for horizontal lines
9 Button for vertical lines
10 Operation mode indicator
13