Panasonic TY-WK85PV12 Manuel D'installation page 17

2. Place the bracket unit marked "L" on the left and the bracket unit marked "R" on the right, and assemble the
bracket units with the two joints using the eight screws for assembling the wall-hanging bracket as illustrated.
Align the gasket sides of the joints with the bracket units.
• The screws should be securely tightened to the torque given below.
(2.5~3.5 N•m)
Screws for assembling
the wall-hanging bracket
Joints (short)
Joints (long)
Caution
When handling the assembled wall-hanging bracket, take hold of the "L" and "R" bracket units. If it is held by
the joints, the joints may be bent out of shape.
3. Adhere the gaskets for the wall-hanging bracket as shown in the figure.
Horizontal installation
Adhere two of the gaskets to the left and right of
the cutout at the bottom.
Notches
(For horizontal installation)
Wall-hanging bracket
L
Gasket
Gasket for the
grounding fitting
Joints (long)
R
Joints (short)
Screws for assembling
the wall-hanging bracket
Vertical installation
Adhere one gasket to the right of the cutout on
the left.
Notches
(For vertical installation)
Gasket for the grounding fitting
17