The "Pan & Tilt" Page - Kompernass IUK 5 A1 Mode D'emploi

WiFi settings
GB
To link the surveillance camera to a wireless network, click on "Scan". All available Wi-Fi networks
within range will be shown in the field "Wi-Fi list". At the same time, the menu item "Use Wi-Fi" is
checked. Click on the name of the Wi-Fi network in the "SSID" column that you want to connect
to. On the right of the name, the MAC address and the reception strength of the Wi-Fi network is
displayed. The fields "SSID", "Network type" and "Wi-Fi encryption" are filled automatically with the
values transferred from the Wi-Fi access point. In closed networks, you must enter the Wi-Fi password
in the field "Network security key".
The "Pan & Tilt" page
Under the menu item "Red front LED", you can select whether the red operating LED should turn
on or turn off.
Under the menu item "Move camera to preset position when powered on", you can select to which
camera position that was previously set and stored the device should move when it is switched on.
If you select "None", the camera head will move to a position with a 90° centred tilt.
Under "PT (pan & tilt) speed" you can set the speed with which the camera reacts to alignment com-
mands. The available options are "Fast", "Medium" or "Slow".
Amount of patrols: Here you can set the number (1–10) of horizontal or vertical pans. These will be
executed if the corresponding function is activated in the main menu.
If the setting "Always" is selected, the camera pans continuously.
IUK 5 A1 111