Configuration Via The Browser Interface; The "Basic Settings" Page - Kompernass IUK 5 A1 Mode D'emploi

Configuration via the browser interface
NOTE
The following applies to all the menus described below:
► To apply the settings you have made to the camera, click on "Set". The screen content flashes
once as confirmation. To reload the data stored in the camera back on the browser page, click
"Refresh".
► After some entries, the camera will restart. A countdown appears on the screen showing the
number of seconds until the restart. Never disconnect the device from the power supply during
this time because otherwise it might be damaged irreparably.
► Click on "Back" to exit the settings and return to the display of the camera image in the browser.

The "Basic settings" page

Device information
Here you can call up the information shown above and can select the user language for the device
via the menu option "Language".
Device name
Here, you can give the device a different name so that you can identify it more easily in the network
if necessary. A maximum of 24 characters can be used. Spaces may not be used; otherwise, the new
name will not be accepted.
IUK 5 A1
GB
105