Before Use; Oiling The Blades; Operation; Changing The Attachments - Zoofari ZTPS 6 D1 Instructions D'utilisation Et Consignes De Sécurité

To prevent impermissible heating
do not cover the plug and the
product during use.
Do not use any corrosive or
abrasive cleaning agents.
Keep the blade oil out of reach
of children. Do not ingest the
blade oil, do not get it into your
eyes. Keep it in a safe place if it
is not being used.
Caution!
It is normal for the product to
have temperature increase during
clipping.
Occasionally turn off the product
while trimming and check to see
if product has possibly gotten too
hot for your pet. If so, let the prod-
uct cool off; otherwise the hot
shaving head may hurt your pet.
As a rough guide, you should
start dipping behind the shoulders
and slowly work your way
backwards and downwards.
Work very carefully when clip-
ping / trimming your pet's sensi-
tive body parts such as face,
stomach, legs or hindquarters.
Cut in the natural direction of
growth of your pet's coat. If you
cut against the direction of
growth, your pet's hair stands
up and is cut shorted as a result.
20 GB/IE

Before use

Remove all parts from the package.

Oiling the blades

It is recommended that you oil the blades before
first use and after cleaning to guarantee complete
functionality.
Apply one or two drops of blade oil
ween the blades and distribute them evenly
(see Fig. I).
Wipe away any excess oil using a cloth.
You can also use any acid-free oil such as
sewing machine oil.

Operation

Changing the attachments

(Fig. C‒E)
Remove the blade guard
head .
1
Place the required trimming guide
prongs facing upwards on the cutting head
and thereby press the flap of the trimming
guide down firmly onto the lower metal
6
edge of the cutting head
Ensure that the trimming guide
engaged with "click" sound before starting to cut /
trim the fur (see Fig. E).

Setting the trim length

To set different trim lengths, hold the main body
of the product, press and hold the safety lock
and slide the adjustment switch
desired position (0.9‒1.8 mm). The set trim length
will be displayed on adjustment switch
1. Select a shorter trim length: Press and hold
the safety lock
switch
upwards. The shortest trim length
4
is 0.9 mm (see Fig. A).
bet-
9
from the cutting
7
with the
6
(see Fig. C and D).
1
has properly
6
into the
4
4
and slide the adjustment
3
1
3
.