The
video door phone is provided with a built-in hearing aid device, which only works during
video calls. Furthermore, the video door phone is equipped with two raised notches, positioned on the
sides next to the buttons
buttons by touch.
3.
BUTTON FUNCTIONS
State
STAND-BY
Button
- Open pedestrian
door
- Connect / disconnect
the automatic door
opening system (hold
the button pressed for
3 seconds)
- Switch display on
(short press)
- Access the
configuration menu
(hold the button
pressed for more than
5 seconds)
---
1
Garage door opener
or special function
2
Special
function
DS1761-001
and
WAITING FOR
AN ANSWER
(receiving call)
(#)
Open pedestrian
door
Access and exit
the OSD menu
(long press)
Activate audio
Garage door
opener
(#)
(#)
o funzione
(§)
speciale
(§)
- Special
function
(§)
- In the OSD
(§)
menu, increase
the video
brightness
to help vision-impaired users locate the position of the two
STAND-BY AND
DURING AUDIO
OPERATION
Open pedestrian
Open pedestrian door
Access and exit
the OSD menu
(long press)
End the conversation
Garage door opener
(#)
Intercom call 1
o funzione speciale
(§)
- Special
function
(§)
Intercom call 2
- In the OSD menu,
increase the video
brightness
CONFIGURATION MENU
BUTTON
(WITH VIDEO DOOR
PHONE ON STAND-BY)
PRESSED
door
Exit the configuration menu
---
View the next page of the
---
configuration menu
- Connect / disconnect the
automatic door opening
- Call tone selection (from
(§)
main calling station, from
secondary calling station,
to floor, intercom, from
- IR sensor on/off
- Adjust video call volume
(volume changes according
to the LOW, MEDIUM, HIGH
(§)
- Disable / enable volume
- Reset default parameters
View previous
configuration
menu page
(short press)
PAGE 1
system
PAGE 2
switchboard)
PAGE 3
PAGE 1
sequence)
PAGE 2
buttons
PAGE 3
9