Wiring Connection - Kenwood KDC-BT640U Guide De Démarrage Rapide

Removing the unit

Wiring connection

Fuse (10 A)
STEERING WHEEL
REMOTE INPUT
REMOTE CONT
ANT CONT
P. CONT
MUTE
ISO connectors
a Light blue/yellow: To the steering wheel remote control adapter
b Blue/white: To the power control terminal when using the optional power
Antenna terminal
c Brown: To connect the KENWOOD navigation system, refer your navigation
d Yellow: Battery wire
e Red: Ignition wire
f Red: A7 from ISO connector
g Yellow: A4 from ISO connector
Pin
If no connections are made, do
not let the wire come out from A4
the tab.
A5
A7
A8
B1, B2
B3, B4
B5, B6
B7, B8
Part list (supplied)
(A) Faceplate (×1)
(B) Trimplate (×1)
(C) Mounting sleeve (×1)
(D) Wiring harness (×1)
(E) Extraction key (×2)
amplifier or to the antenna control terminal in the vehicle
manual
Color and function (for ISO connectors)
Yellow
Blue/White
Red
Black
Purple ], Purple/black [
Gray ], Gray/black [
White ], White/black [
Green ], Green/black [
: Battery
: Power control
: Ignition (ACC)
: Earth (ground) connection
: Rear speaker (right)
: Front speaker (right)
: Front speaker (left)
: Rear speaker (left)
3