GRAFF Master M 6 Notice D'utilisation page 28

Universal Slicer Master M 6 / M 9 / M 91
Carriage
The carriage can be removed from
EN
the machine for better cleaning.
To do that, pull out the carriage
‹
latch on the right side of the car-
riage.
Pull the carriage towards the
‹
back and remove it.
You can now take apart the
‹
GENIO carriage for better clean-
ing.
Remove the slicing support by
‹
placing it vertically and pulling it
out to the top.
You can now also pull off the
‹
flat spring.
Clean all parts with a moist cloth or
under running water.
important!
► Do not clean the slicing support
in a dishwasher!
Please put a few drops of non-
resinous oil or Vaseline on the car-
riage guide once a month. Wipe
off excess oil/Vaseline with a soft
cotton rag.
28